10
English
Release the lever on the trigger gun.
Lock the lever on the trigger gun.
Insert the trigger gun in its holder.
During longer breaks (more than 5 minutes), also
turn the appliance off using the "0/OFF" switch.
몇
CAUTION
Only separate the high-pressure hose from the hand
spray gun or the appliance when there is no pressure in
the system.
ATTENTION
When disconnecting the supply or high pressure hose,
warm water may leak from the connections after opera-
tion.
Remove the Plug 'n' Clean detergent bottle from
the intake and close it with the lid. To store, place
into the intake rotated by 180°.
Release the lever on the trigger gun.
Turn off the appliance "0/OFF".
Disconnect the mains plug from the socket.
Turn off tap.
Press the lever on the trigger gun to release any re-
maining pressure in the system.
Lock the lever on the trigger gun.
Detach the appliance from the water supply.
몇
CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during transport.
Pull the appliance by its transport handle.
Prior to horizontal transport: Remove the Plug 'n'
Clean detergent bottle from the intake and close it
with the lid.
Secure the appliance against shifting and tipping
over.
몇
CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance when storing it.
Park the machine on an even surface.
Press the disconnect on the trigger gun and re-
move the high pressure hose from the trigger gun.
Insert the trigger gun in its holder.
Engage the spray lance in its compartment.
Illustration
Roll the high pressure hose on to the hose drum:
Pull out the hose drum handle, turn it clockwise
then retract the handle.
Stow the power cord and the remaining accesso-
ries on the appliance.
Prior to extended storage periods, as during the winter,
also observe the instructions in the Care section.
The high pressure hose is specially constructed with re-
inforced walls to handle water pressure up to 11 MPa
(1600 psi) - it can be easily damaged and should be
stored carefully.
Do not kink.
Do not drive vehicles over the hose.
Do not expose the hose to sharp edges or corners.
Misuse will lead to ballooning or premature failure and
will invalidate warranty.
ATTENTION
Appliances and accessories that are not completely
drained can be destroyed by frost. Completely drain ap-
pliance and accessories and protect them against frost.
To avoid damage:
Detach the appliance from the water supply.
Detach spray lance from the trigger gun.
Switch the appliance on ("I/ON“), press the trigger
gun lever until no further water is discharged (ap-
prox. 1 min).
Turn off the appliance.
Store the appliance and the entire accessories in a
frost free room.
DANGER
Risk of electric shock.
Prior to all work on the appliance, switch off the ap-
pliance and pull the power plug.
Clean the sieve in the water connection regularly.
Remove coupling from the water connection.
ATTENTION
The sieve must not be damaged.
Illustration
Pull the sieve out using flat pliers.
Clean the sieve under running water.
Reinsert the sieve into the water connection.
Remove filter from suction hose for detergent and
clean under running water.
Interrupting operation
Finish operation
Transport
When transporting by hand
When transporting in vehicles
Storage
Storing the Appliance
High pressure hose
Frost protection
Care and maintenance
Clean the sieve in the water connection
Cleaning the detergent filter
