background image

      

 

English  

9

USING THE ACCESSORIES

WORKING WITH DETERGENTS

Dirtblaster®

    This nozzle features a 0º pencil jet which 

rotates 360º for maximum dirt cutting action, 

effectively increasing cleaning performance 

up to 50%.

 

  This nozzle combines the cleaning perfor-

mance of a 0º pencil jet with the surface 

coverage of a wide angle nozzle.

 

  Detergents can only be applied at low pres-

sure setting (Mix).

 

 

STEP 1:

 

  Install the Vario Power Spray Wand.

 

  Set the spray wand to the low pressure setting 

(Mix).

 

 

STEP 2:

 

  Fill the Detergent Tank with the selected 

detergent.

 

 

STEP 3:

 

  Turn on the pressure washer (I). Pull trigger 

to operate unit. Liquid detergent is drawn into 

the unit and mixed with water. Apply detergent 

to work area. Do not allow detergent to dry 

on surface.

 

 

STEP 4:

 

  To rinse, move the VPS out of "Mix" position 

and pull trigger to operate unit.

 

 

STEP 5:

 

  Cleaning up: Always draw fresh water through 

the detergent tank or siphon tube when done 

to fl ush any remaining detergents from the 

injection system.

For best results see Cleaning Tips for specifi c 

information on how to clean different surfaces.

Always Use Kärcher ® Detergent for Best 

Results.

Kärcher ® biodegradable detergents are specially 

formulated to protect the environment and your 

pressure washer. The special formula won’t clog 

the suction tube fi lter and will protect the internal 

parts of the pressure washer for a longer life. For 

Kärcher ® detergents, check your retailer or visit 

our website:

www.buykarcher.com

  

CAUTION

Never use:

– Bleach, Chlorine products and other corrosive 

chemicals

– Liquids containing solvents (i.e., paint thinners, 

gasoline, oils)

– Tri-sodium phosphate products

– Ammonia products

– Acid-based products

These chemicals will harm the unit and will damage 

the surface being cleaned.

Use of these items will void the warranty.

 

 

Not recommended for soft materials, sid-

ing, painted surfaces, decks or autos.

Summary of Contents for K 3000 G

















Reviews: