background image

4

  English

  

SAVE 

THESE 

INSTRUCTIONS

 

 

WARNING

 

  When using this product, basic precautions 

should always be followed, including the fol-

lowing:

    Read all the instructions before using the 

product.

     To reduce the risk of injury, close supervision 

is necessary when a product is used near 

children.

     Know how to stop the product and bleed pres-

sures quickly. Be thoroughly familiar with the 

controls.

     Stay alert – watch what you are doing.

     Do not operate the product when fatigued or 

under the infl uence of alcohol or drugs.

     Keep operating area clear of all persons.

     Do not overreach or stand on unstable sup-

port. Keep good footing and balance at all 

times.

     Follow the maintenance instructions specifi ed 

in the manual.

     This product is provided with a Ground Fault 

Circuit Interrupter built into the power cord 

plug. If replacement of the plug or cord is 

needed, use only identical replacement parts.

 

 

WARNING

 

  Risk of Injection or Injury – Do Not Direct 

Discharge Stream At Persons.

     High pressure jets can be dangerous if mis-

used. The jet must not be directed at persons, 

animals, electrical devices, or the unit itself.

     Wear safety goggles.

 

 

WARNING

 

  Risk Of Explosion – Do not spray fl ammable 

liquids.

     Do not use acids, solvents, or any fl ammable  

or alkaline material in this product. These 

products can cause physical injuries to the 

operator and irreversible damage to the ma-

chine.

IMPORTANT SAFETY INSTRUCTIONS

 

 

WARNING

 

  Risk of Electrocution

     Inspect cord before using – Do not use if cord 

is damaged.

     Keep all connections dry and off the ground.

     Do not touch plug with wet hands.

     Do not use extension cord with this product.

     Connect to individual branch circuit only.

  

 

CAUTION

 

  This unit has been designed for use with 

cleaning detergents recommended by the 

manufacturer. The use of other cleaning 

detergents may affect the operation of the 

machine and void the warranty.

  

 

CAUTION

 

  Gun Kicks Back – Hold with both hands.

     The Spray Gun Safety Lock prevents the 

spray from accidentally being engaged. This 

safety feature DOES NOT lock spray in the 

ON position.

 

 

WARNING

     Do not spray electrical apparatus and wiring.

    Do not use with fl ammable liquids or toxic 

chemicals.

■  

High pressure – keep clear of nozzle.

     Injection hazard – equipment can cause se-

rious injury if the spray penetrates the skin. 

Do not point the gun at anyone or any part of 

the body. In case of injury seek medical aid 

immediately.

     This system is capable of producing high 

pressure to avoid rupture and injury, do not 

operate this pump with accessories rated less 

than the stated maximum pressure (including 

but not limited to spray guns, hoses and hose 

connections).

     Before servicing, cleaning or removing any 

parts, shut off power and relieve pressure.

     If connection is made to a potable water sys-

tem, the system shall be protected against 

back fl ow.

Summary of Contents for K 3000 G

















Reviews: