English
7
STEP 6:
To push the appliance, the transport
handle must be pulled all the way up;
it will lock into place audibly.
STEP 7:
Insert detergent suction tube onto
the hose fitting.
Install the dosage regulator and con-
nect using 2 screws.
Note
: During installation you must
make sure that the tongues of the
dosage regulator match up with the
intended recesses in the casing.
STEP 8:
Push the high pressure hose into the
trigger gun until it locks audibly.
Note:
Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
Install the dosage regulator for
detergent
Connect the high pressure hose to
the trigger gun
