background image

English

WARNING 

When using this product basic precau-
tions should always be followed, includ-
ing the following:

Read all the instructions before using 
the product.

To reduce the risk of injury, close su-
pervision is necessary when a prod-
uct is used near children.

Know how to stop the product and 
bleed pressures quickly. Be thor-
oughly familiar with the controls.

Stay alert – watch what you are do-
ing.

Do not operate the product when fa-
tigued or under the influence of alco-
hol or drugs.

Keep operating area clear of all per-
sons.

Do not overreach or stand on unsta-
ble support. Keep good footing and 
balance at all times.

Follow the maintenance instructions 
specified in the manual.

This product is provided with a 
Ground Fault Circuit Interrupter built 
into the power cord plug. If replace-
ment of the plug or cord is needed, 
use only identical replacement parts.

WARNING 

Risk of Injection or Injury – Do Not 
Direct Discharge Stream At Persons.

High pressure jets can be dangerous 
if misused. The jet must not be di-
rected at persons, animals, electrical 
devices, or the unit itself.

Wear safety goggles.

WARNING 

Risk Of Explosion – Do not spray 
flammable liquids.

Do not use acids, alkaline, solvents, 
or any flammable material in this 
product. These products can cause 

physical injuries to the operator and 
irreversible damage to the machine.

WARNING – Risk of Electrocu-
tion

Inspect cord before using – Do not 
use if cord is damaged.

Keep all connections dry and off the 
ground.

Do not touch plug with wet hands.

Do not use extension cord with this 
product.

Connect to individual branch circuit 
only.

CAUTION

This unit has been designed for use with 
cleaning detergents recommended by 
the manufacturer. The use of other 
cleaning detergents may affect the oper-
ation of the machine and void the war-
ranty.

CAUTION

Gun Kicks Back – Hold with both 
hands.

The Spray Gun Safety Lock prevents 
the spray from accidentally being en-
gaged. This safety feature DOES 
NOT lock spray in the ON position.

WARNING

DO NOT SPRAY ELECTRICAL APPA-
RATUS AND WIRING.

DO NOT USE WITH FLAMMABLE LIQ-
UIDS AND TOXIC CHEMICALS.

HIGH PRESSURE. KEEP CLEAR OF 
NOZZLE.

INJECTION HAZARD: EQUIPMENT 
CAN CAUSE SERIOUS INJURY IF 
THE SPRAY PENETRATES THE 
SKIN. DO NOT POINT THE GUN AT 
ANYONE OR ANY PART OF THE 
BODY. IN CASE OF PENETRATION 
SEEK MEDICAL AID IMMEDIATELY.

THIS SYSTEM IS CAPABLE OF PRO-
DUCING 1800 PSI TO AVOID RUP-

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for K 3.740



















Reviews: