background image

16 

English

For more effortless cleaning of all 
smooth surfaces (painted, glass and 
plastic) try the Kärcher

 ®

 Rotating Wash 

Brush. Use it on your automobile, house 
siding or windows. The water pressure 
from your pressure washer causes the 
inner brushes to gently spin, making 
your cleaning job much easier. The an-
gle of brush head is adjustable to help 
you reach difficult areas. Excellent for 
the application of detergent. A must-
have accessory designed for Kärcher

 ®

 

pressure washers up to 2300 PSI. (bay-
onet)

Part No. 2.640-743.0

Made with soft bristles that will not harm 
painted surfaces. Easily attaches direct-
ly to the trigger gun. Ideal for stubborn 
dirt on cars, boats, patio furniture and 
other surfaces. Great for applying deter-
gent. Fits most Kärcher

 ®

 pressure 

washers up to 2300 PSI. (bayonet)

Part No. 2.640-740.0

Need to clean blocked pipes, drains or 
downspouts? The Kärcher

 ®

 pipe clean-

ing kit is the answer! The pipe cleaner 
propels itself forward while simultane-
ously flushing out debris. For example, 
insert the cleaning nozzle in the base of 
a  downspout, pull the trigger on the 
pressure washer gun and watch as the 
nozzle shoots out leaves and other de-
bris while climbing upward. Connects di-
rectly to the trigger gun of most 
Kärcher

 ®

 pressure washers up to 

2300 PSI. (bayonet)

Part No. 2.640-747.0

Why spend hours stripping old paint and 
rust by hand using harsh chemicals? Let 
the Kärcher

 ®

 Wet Sandblasting Kit do 

the work! Attach the kit to your pressure 
washer, add abrasive material and at-
tack the rust and paint with our eco-
friendly alternative. Fits most Kärcher

 ®

 

pressure washers up to 2300 PSI. (bay-
onet)

Part No. 2.638-792.0

Ideal for applications which require a 
thick foam. Simply fill the resevoir cup 
with liquid pressure washer detergent to 
generate a foam spray. Connects direct-
ly to the trigger gun. Fits most Kärcher

 ®

 

pressure washers up to 2300 PSI. (bay-
onet)

Part No. 6.964-507.0

For cleaning surfaces such as patios, 
terraces and driveways without splash-
back, there is no better solution than the 
Kärcher

 ®

 T 200. It saves time by clean-

ing a 30 cm (1 ft.) wide area gently as it 
hovers, providing consistent, streak-free 
cleaning. When you finish cleaning the 
patio and driveway, remove the wand 
and use the handle to clean garage 
doors and other vertical surfaces. In-
cludes two nozzles which spin at high 
speed for optimum results. Our top sell-
ing accessory for Kärcher

 ®

 pressure 

washers up to 2300 PSI. (bayonet) 

Part No. 2.642-188.0

Rotating Wash Brush (bayonet)

Soft Clean Washing Brush

7.5 m (25 ft.) Pipe Cleaning Kit 

(bayonet)

Wet Sandblasting Kit (bayonet)

Detergent Foamer Attachment

T 200 Wide Area Surface Cleaner

Summary of Contents for K 3.740



















Reviews: