1 800-537-4129 page 3
Step 1
Connect the high pressure hose to
the unit’s high pressure outlet.
Step 4
Insert the spray wand of your
choice into the wand extension. Press in
against the spring tension and twist into
the locked position.
Step 2
Connect garden hose to unit’s
water inlet.
ASSEMBLY INSTRUCTIONS
Water Supply
(Cold Water Only)
• Water hose must be at least 3/4 inch in
diameter.
• Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).
• Flow rate can be determined by running
the water for one minute into an empty
5-gallon container.
IMPORTANT PRECAUTIONS –
continued
• The water supply temperature must not
exceed 104°F/40°C.
• Never use the pressure washer to draw in
water contaminated with solvents, e.g. paint
thinners, gasoline, oil, etc.
• Always prevent debris from being drawn into
the unit by using a clean water source.
Step 3
Slide the spray
wand extension into the
gun. Turn the wand collar
onto the gun threads until
tight.