8
English
Illustration
–
Fill the detergent solution in the detergent
tank of the foam nozzle (observe dosage in-
structions on the packaging of the deter-
gent).
–
Connect the detergent tank to the foam noz-
zle.
–
Connect the foam nozzle to the trigger gun.
Spray the detergent sparingly on the dry sur-
face and allow it to react, but not to dry.
Spray off loosened dirt with the high pres-
sure jet.
Illustration
Release the lever of the trigger gun and lock
it.
During longer breaks (more than 5 minutes),
also turn the appliance off using the "0/OFF"
switch.
몇
CAUTION
Only separate the high-pressure hose from the
trigger gun or the device when there is no pres-
sure in the system.
Release the lever of the trigger gun.
Turn off the appliance "0/OFF".
Disconnect the mains plug from the socket.
Turn off tap.
Press the lever on the trigger gun to re-
lease any remaining pressure in the sys-
tem.
Lock the lever of the trigger gun.
Detach the appliance from the water supply.
몇
CAUTION
Risk of personal injury or damage!
Mind the weight and storage of the appliance
during transport.
Lift appliance by the carrying handle and car-
ry it.
Secure the appliance against shifting and
tipping over.
Park the machine on an even surface.
Illustration
Stow the power cord and the remaining ac-
cessories on the appliance.
Prior to extended storage periods, as during the
winter, also observe the instructions in the Care
section.
ATTENTION
Appliances and accessories that are not com-
pletely drained can be destroyed by frost. Com-
pletely drain appliance and accessories and
protect them against frost.
To avoid damage:
Completely drain all water from the appli-
ance: Switch the appliance on with detached
high pressure hose and detached water sup-
ply (max. 1 minute) and wait, until no more
water exits at the high pressure connection.
Turn off the appliance.
Store the appliance and the entire accesso-
ries in a frost free room.
The appliance is maintenance free.
DANGER
Risk of electric shock.
Prior to all work on the appliance, switch off
the appliance and pull the power plug.
Clean the sieve in the water connection regularly.
ATTENTION
The sieve must not be damaged.
Remove coupling from the water connection.
Illustration
Pull the sieve out (e.g. using flat pliers), clean
under running water and then reinsert it.
Operation with detergent
Recommended cleaning method
Interrupting operation
Finish operation
Transport and storage
When transporting by hand
When transporting in vehicles
Storing the Appliance
Frost protection
Maintenance and care
Care
Clean the sieve in the water connection