Kärcher K 2 Horizontal, Manual

Page: 18 / 70

18 English
Personal protective equipment
몇 CAUTION
●
Wear suitable protective
clothing and safety goggles to protect your-
self from water or dirt backsplash.
●
Aero-
sols can be formed when using high-
pressure cleaners. Inhaling aerosols can
be harmful for your health. Depending on
the application, the use of fully shielded
nozzles (e.g. surface cleaners) can signifi-
cantly lower the emission of aqueous aero-
sols. Depending on the environment to be
cleaned, wear a suitable respiratory protec-
tive mask of class FFP 2 or comparable to
protect yourself from inhaling aerosols if the
use of a fully shielded nozzle is not possi-
ble.
General safety warnings

DANGER
●
Risk of asphyxiation. Keep
packaging film out of the reach of children.
몇
WARNING
●
Only use the device for its
proper use. Take into account the local con-
ditions and beware of third parties, in par-
ticular children, when working with the
device.
●
Persons with reduced physical,
sensory or mental capabilities, or those
with a lack of experience and knowledge,
are only allowed to use the appliance if they
are supervised or have been instructed
with respect to using the appliance safely,
and understand the resultant dangers in-
volved.
●
Children must not operate the
device.
●
Children must be supervised to
prevent them from playing with the appli-
ance.
몇 CAUTION
●
Safety devices are provid-
ed for your own protection. Never modify or
bypass safety devices.
Risk of electric shock

DANGER
●
Only connect protection
class I devices to properly earthed power
sources.
●
Only connect the device to al-
ternating current. The voltage indicated on
the type plate must match the voltage of the
power source.
●
Only operate the device
via a fault current protection switch (maxi-
mum 30 mA).
●
Never touch the mains
plug and socket with wet hands.
●
The
mains plug and coupling of the extension
cable must be water tight and may not be
placed in water. The coupling may not be
on the floor. Use cable drums to ensure that
the sockets are at least 60 mm above the
floor.
●
All live parts in the work area must
be protected against water jets.
몇 WARNING
●
Only connect the device
to an electrical connection which has been
set up by a qualified electrician as per
IEC 60364-1.
●
Check the power supply
cable with mains plug for damage before
operation each time. Do not put the device
into operation with a damaged power sup-
ply cable. Have a damaged power supply
cable replaced immediately by the author-
ised customer service / qualified electri-
cian.
●
Do not damage the power supply
and extension cable by running over it,
crushing or yanking it or similar. Protect the
power supply cable from heat, oil and sharp
edges.
●
Unsuitable electrical extension
cables are dangerous. Only use approved
and appropriately marked electrical exten-
sion cables with a sufficient line cross sec-
tion when outdoors: 1-10 m : 1.5 mm
2
,
10-30 m : 2.5 mm
2
몇 CAUTION
●
Always fully unwind the
extension cable from the cable drum.
●
In
case of longer breaks in operation and after
use, switch off the device at the main switch
/ device switch and pull the mains plug.
Operation

DANGER
●
Operation in explosive at-
mospheres is prohibited.
●
Never suction
solvents, liquids containing solvents or un-
diluted acids. This includes e.g. petrol,
paint thinner or heating oil. The spray mist
is highly flammable, explosive and poison-
ous.
●
Damaged wheels / tyre valves are
extremely dangerous. Damaged wheels /
tyre valves can be damaged by the high-
pressure jet and explode. The first sign of
this is discolouration of the tyres. Keep a
spray distance of at least 30 cm when
cleaning the wheels / tyre valves.
몇 WARNING
●
Do not use the device if
people without the proper protective cloth-
ing are in its reach.
●
Do not aim the high-
pressure jet at yourself, e.g. to clean