background image

English

 13

gent to dry on surface. If needed, use 
special wash brush attachment (not in-
cluded) to remove stubborn dirt. Rinse 
at high-pressure in a sweeping motion 
keeping the spray nozzle approximately 
15-20 cm (6-8 in.) from the cleaning sur-
face (distance should increase when 
rinsing pin-striping or other sensitive 
surfaces). Always clean from top to bot-
tom and from left to right. For best re-
sults, wipe surface dry with a chamois or 
soft dry cloth.

(with or without detergent).

 Pre-rinse 

cleaning surface with fresh water. If us-
ing detergent or Degreaser, apply deter-
gent at low pressure. Allow detergent to 
remain on surface 1-3 minutes. Do not 
allow detergent to dry on surface. Rinse 
at high-pressure keeping the spray noz-
zle approximately 7.5-15 cm (3-6 in.) 
from the cleaning surface. For removing 
extremely stubborn dirt, it may be nec-
essary to move the spray nozzle even 
closer to the surface for greater dirt cut-
ting action. 

(with or without detergent).

 Pre-rinse 

furniture and surrounding area with 
fresh water. If using detergent, apply to 
surface at low pressure. Allow detergent 
to remain on surface 1-3 minutes. Do 
not allow detergent to dry on surface. If 
needed use special Wash Brush Attach-
ment (not included) to remove stubborn 
dirt. Rinse at high-pressure in a sweep-
ing motion keeping the spray nozzle ap-
proximately 7.5-15 cm (3-6 in.) from the 
cleaning surface. For best results, clean 
from top to bottom and from left to right. 

Optional accessories are available to 
further enhance your cleaning capabili-
ties. These accessories are accurate as 
of the printing date of this manual.  
Please check our website for pricing and 
up-to-date information.

Specially formulated to protect your 
pressure washer from freezing, corro-
sion and premature wear. The Pump 
Guard also adds lubrication to valves 
and seals to prevent sticking. Highly rec-
ommended for all Kärcher

 ®

 pressure 

washers!

Part No. 9.558-998.0

Extension Hose for all Kärcher

 ®

 high-

pressure washers between the original 
equipment hose and gun up to 
2000 PSI.

Part No. 2.642-588.0

Need to clean second story windows or 
other high areas? Increase the reach of 
your pressure washer by up to 1.67 m 
(66 in.) with this extension kit. Includes 4 
aluminum sections for variable length. 
1.67 m (66 in.) fully assembled. Fits 
most Kärcher

 ®

 pressure washers up to 

2300 PSI. (bayonet)

Part No. 2.640-746.0

Barbecue Grills, Outdoor Power 

Equipment and Gardening Tools 

Patio and Lawn Furniture

OPTIONAL CLEANING 

ACCESSORIES

Pump Guard

7.5 m (25 ft.) Extension High-

Pressure Hose

1.67 m (66 in.) Extension Wand 

(four-piece)

Summary of Contents for K 2 Car Care Kit

















Reviews: