background image

English

 13

sults, clean from top to bottom and from 
left to right. 

!

Before cleaning any surface an in-
conspicuous area should be cleaned 
to test spray pattern and distance for 
maximum cleaning results.

!

If painted surfaces are peeling or 
chipping, use extreme caution as 
pressure washer may remove the 
loose paint from the surface.

!

When using on surfaces which might 
come in contact with food, flush sur-
faces with plenty of drinking water.

!

For additional cleaning tips, visit our 
website at www.karcher-usa.com

Optional accessories are available to 
further enhance your cleaning capabili-
ties. These accessories are accurate as 
of the printing date of this manual.  Plea-
se check our website www.karcher-
usa.com for pricing and up-to-date infor-
mation.

 

Specially formulated to protect your 
pressure washer from freezing, corrosi-
on and premature wear. The Pump 
Guard also adds lubrication to valves 
and seals to prevent sticking. Highly re-
commended for all Karcher pressure 
washers!

Part No. 9.558-998.0

Attach this accessory to your pressure 
washer to quickly pump large quantities 
of water out of a standing source, such 
as a barrel or bucket. Fits most Karcher 
pressure washers up to 2300 PSI.

Part No. 2.637-214.0

Replacement hose fits Kärcher pressu-
re washer with screw-on type gun con-
nections from 2400psi to 2500psi, 
Extension Hose for all Kärcher high 
pressure washers between the original 

equipment hose and machine up to 
2500 psi.

Part No. 2.640-850.0

Need to clean second story windows or 
other high areas? Increase the reach of 
your pressure washer by up to 66" with 
this extension kit. Includes 4 aluminum 
sections for variable length. 66" fully as-
sembled. Fits most Karcher pressure 
washers up to 2300 PSI. (bayonet)

Part No. 2.640-746.0

For more effortless cleaning of all 
smooth surfaces (painted, glass and 
plastic) try Karcher's Rotating Wash 
Brush. Use it on your automobile, house 
siding or windows. The water pressure 
from your pressure washer causes the 
inner brushes to gently spin, making 
your cleaning job much easier. The ang-
le of brush head is adjustable to help 
you reach difficult areas. Excellent for 
the application of detergent. A must-
have accessory designed for Karcher 
pressure washers up to 2300 PSI. 
(bayonet)

Part No. 2.640-743.0

Recommendations

OPTIONAL CLEANING ACCESSORIES

Pump Guard

Water Pumping Kit

25 Ft. Extension /Replacement 

High-Pressure Hose

66" Extension Wand (Four piece)

Rotating Wash Brush (bayonet)

Summary of Contents for K 2.7

















Reviews: