![background image](http://html1.mh-extra.com/html/karcher/k-2-100/k-2-100_german-manual_654144012.webp)
– 5
Caution
Create stability for the appliance prior to all work
on or with the appliance to prevent accidents or
damage.
–
The stability of the appliance is warranted
when it is placed onto an even surface.
The scope of delivery of your appliance is illus-
trated on the packaging. Check the contents of
the appliance for completeness when unpack-
ing.
In the event of missing accessories or any trans-
port damage, please contact your dealer.
These operating instructions describe the maxi-
mum equipment. Depending on the model, there
are differences in the scopes of delivery (see
packaging).
Illustrations on Page 2
1
High pressure hose connection
2
Appliance switch "0/OFF“/ „I/ON“
3
Storage hook for high pressure hose and
mains connection cable
4
Carrying handle
5
Storage for spray lance
6
Storage for trigger gun
7
Water connection with integrated sieve
8
Detergent suction hose (with sieve)
9
Coupling element for water connection
10 Mains cable with mains plug
11 Trigger gun
12 Lock trigger gun
13 Clamp for high pressure hose
14 High pressure hose
Optional accessories
15 Rotary wash brush
16 Washing brush
17 Spray lance with high pressure nozzle
18 Spray lance with Dirtblaster
19 Spray lance with pressure regulation (Vario
Power)
20 Accessory net
Special accessories expand the possibilities of
using your appliance. Please contact your
KÄRCHER dealer for further information.
Mount loose parts delivered with appliance prior
to start-up.
Illustrations on Page 2
Illustration
Attach the carrying handle.
Illustration
Pull out the clamp for the high-pressure hose
from the hand spray gun (e.g. a Philips
screwdriver).
Illustration
Connect high pressure hose to trigger gun.
Push the clamp in until it locks. Check the se-
cure connection by pulling on the high-pres-
sure hose.
Optional
Illustration
Hook the accessories net into the hooks
shown in the illustration.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply with-
out a system separator. Use a suitable
system separator manufactured by KÄRCHER;
or, as an alternative, a system separator as per
EN 12729 Type BA. Water flowing through a sys-
tem separator is considered non-drinkable.
Caution
Always connect the system separator to the wa-
ter supply, never directly to the appliance!
Note:
Impurities in the water can damage the
high-pressure pump and accessories. For pro-
tection, the use of the KÄRCHER water filter (op-
tional accessory, order no. 4.730-059) is
recommended.
Observe regulations of water supplier.
For connection values, see type plate/technical
data.
Use a fibre-reinforced water hose (not in-
cluded) with a standard coupling. (Minimum
diameter 1/2 inch (13 mm), minimum length
7.5 m).
Illustration
Screw the coupling element to the water
connection on the appliance.
Push the water supply hose onto the cou-
pling unit, then connect it to the water supply.
Prerequisites for the appliance's
stability
Operation
Scope of delivery
Description of the Appliance
Special accessories
Before Startup
Water supply
Water supply from mains
12
EN