Kärcher IVS 100/40 M, Manual

Page: 19 / 330

– 5
몇
WARNING
Do not vacuum without the filter elements;
otherwise, the suction motor can get dam-
aged and this can be hazardous to health
on account of increased release of fine dust
particles.
 Bring the device into the working posi-
tion and lock parking brake.
 Insert the suction hose into the suction
hose connection.
 Attach the desired accessoried to the
suction hose.
 Ensure that the vacuum material con-
tainer has been inserted properly.
 Check the fill level in the dirt container
prior to starting work and empty the
container if necessary.
몇
Warning
The highest allowed net impedance at the
electrical connection point (refer to techni-
cal specifications) is not to be exceeded.
In case of confusion regarding the power
impedance present on your connection,
please contact your utilities provider.
The device is suitable for vacuuming fine
dust up to dust class M. Use a dust bag
when vacuuming this dust class.
Conventional vacuumed material (wet/dry)
can be vacuumed directly into the vacuum
cleaner waste container without a dust bag.
After vacuuming moist or liquid substanc-
es, observe the notes in chapter "Changing
from wet vacuuming to dry vacuuming".
몇
CAUTION
Never remover the filter when vacuuming.
– The appliance is fitted with a disposal
bag, order no. 6.907-336.0 (5 ea.).
Note: All types of dust up to dust class M
can be vacuumed with this device. The use
of a dust collection bag (for order no., see
label on the device) is required by law.
Note: The appliance is suited as industrial
vacuum cleaner to take up dry, non-com-
bustible dusts with MAK values greater
than or equal to 0.1 mg/m
3
.
ATTENTION
Remove the dust bag before wet vacuum
cleaning.
 Lock parking brakes.
 Unlock and lower the container.
 Pull the container out by the handle.
 Insert the disposal bag so that it is snug
against the reservoir wall and the reser-
voir bottom.
 Pull disposal bag over the container.
 Reinsert container and lock.
 Lock parking brakes.
 Unlock and lower the container.
 Switch on device to avoid releasing
dangerous dusts.
 Pull the container out by the handle.
 Put the disposal bag over.

Tightly seal the disposal bag with clo-
sure strips underneath the opening.
 Remove disposal bag.

Dispose of the disposal bag according
to the local provisions.
 Reinsert container and lock.
Start up
Operation
Disposal system
Installing the dust disposal bag
Removing the dust disposal bag
19 EN