– 5
Note:
Additional regulations can be appli-
cable to dusts with an ignition capacity be-
low 1mJ.
Note:
You can use this appliance to take up
all types of dust up to dust class H. The use
of a safety filter bag is required by law.
Note:
As an industrial vacuum cleaner the
appliance is suitable for vacuuming up dry,
combustible dusts with MAK values.
Bring the appliance to working position
- secure it, if required, with parking
brakes.
Insert the suction hose into the suction
hose connection.
Attach the desired accessoried to the
suction hose.
Ensure that the vacuum material con-
tainer has been inserted properly.
Caution
The highest allowed net impedance at the
electrical connection point (refer to techni-
cal data) is not to be exceeded. In case of
confusion regarding the power impedance
present on your connection, please contact
your utilities provider.
Turn on/off switch to "1".
몇
Warning
Avoid rolling up or bending the hose while
using the vacuum cleaner.
You must insert a safety filter bag into the
vacuuming material container to empty the
appliance without causing dust:
Insert the safety filter bag into the con-
tainer and attach it carefully to the con-
tainer wall.
Put over the edge of the bag over the
rim of the vacuuming material contain-
er.
Insert the vacuuming material container
back into the appliance.
After use, close the safety filter bag and
remove it from the vacuuming material
container.
Dispose of the safety filter bag with its
contents according to the applicable
regulations.
The machine is equipped with a suction
power monitor. If the air speed in the suc-
tion hose falls below 20 m/s, the manome-
ter will display 19.5 kPa:
Perform the following activities to regain the
prescribed air speed of more than 20 m/s:
Switch off the appliance using the On/
Off switch.
Clean the filter (see chapter "Cleaning
the filter").
Check suction hose and attachments
for blocks.
If these measures do not lead to the de-
sired reduction in pressure display:
Switch off the appliance and replace the
filter (see Chapter "Exchanging/replac-
ing the filter")
Start up
If necessary, peel the adhesive label in
the relevant national language off the
accompanying adhesive label sheet
and paste it over the German text on
the appliance.
Power connection
Operation
Safety filter bag
Monitoring the suction performance
18
EN
