Maintenance/Repair
27/49
Disassembly of the suction turbine
WARNING
•
These works may only be carried out by an electrician.
• Before any work near or at the extraction turbine, let its surface cool down to below 50°C or wear safety
gloves and work protection clothing that isolate against the arising temperatures.
Before starting work
remove the plug from the wall socket!
Preparations:
Set down drive unit on suitable surface in the position displayed.
•
Screw off threaded nuts (22).
•
Loosen hexagon screws (29) and remove hood (2).
•
Remove pneumatic hose (32).
•
Loosen hexagon screws (29) and remove interim washer (1).
Turbine removal:
•
Disconnect electrical connections (44).
•
Remove flange-connected hoses by hexagon screw (13).
•
Loosen hexagon screws (5).
•
Lift out turbine (9) with bracket (4).
•
Loosen hexagon screws (8).
Assembly occurs in the inverse order.
