Kärcher IB 15/120, Manual

Page: 7 / 44

-
5
1 Indicator lamp - control voltage
green: Control voltage OK
red: Control voltage too low
yellow: Emptying of dry ice contain-
er active
2 Indicator lamp emergency STOP
red: Emergency stop button activat-
ed
green: Emergency stop button not
activated
3 Indicator lamp - compressed air
green: Pressure OK
orange: selected jet pressure not
reached
red: Pressure too low (below 0.15
MPa/1.5 bar)
4 Indicator lamp – dosing device
green: Drive OK
red: Error in drive
5 Indicator lamp - jet pistol
green: Jet pistol OK
orange: The trigger of the jet pistol
was activated during the switch-on
process
red: Jet pistol disconnected or con-
trol line damaged
6 Display field
1 Nozzle
2 Jet pistol
3 Coupling spray agent hose
4 Coupling of the control cable
5 Safety lever
6 Trigger
7 Operating type switch
Position "1": Compressed air jet
Position "2": Dry ice jet (com-
pressed air and dry ice pellets)
1 Nozzle
2 Jet pistol
3 Trigger
4 Safety button
5 Coupling spray agent hose
6 Coupling of the control cable
7 Key for the dry ice dosing on/off
Illuminates red when the dry ice
dosaging is switched off
8 Increase the dry ice dosing
9 Key "increase jet pressure"
10 Key "decrease jet pressure"
11 Decrease the dry ice dosing
The case serves the storage of the
nozzles and the associated tools.
1 Lock
2 Carrying handle
3 Unlocking

Open locks.

Swivel the lid downwards.
몇
CAUTION
Risk of damage, do not place heavy
objects on the opened lid.

Push the unlocking devices and re-
move the case.

Turn the case so that the closures
are pointing upwards.

Place one side of the case on the
holder and lock it place.

Press the case against the appli-
ance and lock the opposite holder
in place.

DANGER
Risk of injury on account of flying dry
ice pellets.
While preparing the appliance, check
and ensure that all components, espe-
cially the spray agent hose are in prop-
er condition. Replace damaged com-
ponents with defect-free ones.
Clean dirty components and ensure that
they are in proper working condition.

Place the machine on a horizontal,
even surface and block the parking
brakes of the steering rollers.
Note:
The spray agent hose can be covered
with a protective hose to protect it
against wear and soiling. If necessary,
push the protective hose over the
spray hose prior to connecting it.

Connect the spray agent hose to
the machine and secure it.

Connect the jet pistol to the spray
agent hose and secure it.

Connect the control cable to the ap-
pliance.

Connect the control cable to the ap-
pliance.
Display Jet equipment
Jet gun
Jet pistol Advanced (option)
Case for accessories
Opening the case
Separating the case from the
appliance.
Attaching the case to the appliance.
Start up
7 EN