English 5.906-548.0 Rev. 00 (04/12)
81
몇
Warning
Danger of scalding by hot water. After operation with
hot water, the device must be operated with openend
handgun with cold water for at least two minutes.
Shut off water supply.
Let the device run in cold water operation until the
boiler and the lines are empty and the lack of water
fuse switches the device off.
Remove the water inlet hose from the appliance.
Danger
Risk of electric shock.
Adhere to the electrical safety instructions when
working on the electrical system of the appliance.
Disconnect the appliance from power, secure against
inadvertent connection and ensure that no voltage is
flowing to the appliance.
Set the appliance switch to "0/OFF“.
Disconnect the mains plug from the socket.
Remove the device hood (see "Device hood").
Unscrew the water fine filter from the boiler.
Remove the cover with the insulation.
1 Boiler fastening screws
2 Boiler drain screw
Loosen the drain screw.
Drain water.
Unscrew the fastening screws from the boiler.
1 Screw
Remove two screws.
1 System care hose
2 Rinse hose to the detergent dosing valve.
Pull the care system hose off the boiler.
Pull the rinse hose off the boiler.
1 Temperature sensor
2 temerature limiter
3 Water shortage safeguard
Remove the temperature sensor from the heating
element.
Pull the temperature limiter out of the pipe.
6.9
Remove boiler