English 5.906-548.0 Rev. 00 (04/12)
5
Good service work requires extensive and practice-
oriented training as well as well-structured training
materials.
Hence we offer regular basic and advanced training
programmes covering the entire product range for all
service engineers.
In addition to this, we also prepare service manuals
for important appliances - these can be initially used
as instruction guides and later on as reference
guides.
Apart from this, we also regular information about
product enhancements and their servicing.
If you should require supplements, have corrections
or questions regarding this document, please ad-
dress these citing the following subject to:
[email protected]
The responsible product specialist will take care of
your issue.
Copying and duplication of texts and diagrams as
well as third-party access to this information is
permitted only with the explicit permission of the
company:
Alfred Kärcher GmbH & Co. KG
P O Box 160
D -71349 Winnenden
www.kaercher.com
Danger
Immediate danger that can cause severe injury or
even death.
몇
Warning
Possible hazardous situation that could lead to se-
vere injury or even death.
Caution
Possible hazardous situation that could lead to mild
injury to persons or damage to property.
몇
Warning
Prior to opening the electric box, all power to the ap-
pliance must be shut off (pull mains plug) and it must
be protected from inadvertent startup.
Mobile hot water high pressure cleaner in different
performance classes for commercial use.
–
Electrically heated boiler
–
Water supply with coarse dirt filter and fine filter
from the boiler
–
Float valve in the boiler
–
Built-in calcification protection
–
Hourmeter built into the control electronics
–
Crane suspension can be added later
–
Hose drum cannot be upgraded
–
Cable remote control cannot be upgraded
–
SB module cannot be upgraded
–
HDS-E 8/16-4M 12kW: 17,5 kW
–
HDS-E 8/16-4M 24kW: 29,5 kW
–
HDS-E 8/16-4M 36kW: 41,5 kW
–
Control electronics
–
Power switch
–
Two pressure switches
–
Water temperature regulation with temperature
sensor
–
Water shortage safeguard
–
Dry-run protection for pump and heating element
–
Temperature controller heating element
–
Dimensioning of cables and contactors as per
heating output
–
Level sensor for system care RM 110/111 and
lack of oil
–
Component tests
–
Fault monitoring and fault display
–
4-pin water and air-cooled electric motor
–
Motor with winding protection
–
3 piston axial pump, piston with ceramic coating
–
Piston (d=18 mm) without piston shoes
–
Pump head made of brass
–
Suction and high pressure valves made of plastic
or stainless steel
–
Swash plate with axial ball bearing
–
Manometer
–
Overflow valve with pressure and quantity regula-
tion
–
Working pressure: 165 bar
–
Water quantity: 710 - 760 l/h
–
Safety valve
1
Preface
Subject:
Fall 112070
2
Safety instructions
2.1
Hazard levels
2.2
General notes on safety
3
Technical Features
3.1
General
3.2
Connection performance of appliance
3.3
Electrical/electronics
3.4
Drive
3.5
High-pressure pump