background image

– 8

Removal of light contaminations and clear 
rinse, i.e.: Gardening tools, terrace, tools, 
etc.

Set operating pressure according to 
need.

The appliance works in the most economi-
cal temperature range.

Note:

 The temperature can be regulated 

up to 60 °C.

We recommend the following cleaning tem-
peratures:

Light contaminations

30-50 °C

Contaminations containing protein, i.e. 
in the food processing industry

max. 60 °C

Vehicle cleaning, machine cleaning

60-90 °C

De-preserve, contaminations contain-
ing strong fat contents

100-110 °C

De-frosting of surcharge substances, 
partially facade cleaning

up to 140 °C

Danger

Scalding danger!

Set temperature regulator to desired 
temperature.

Danger

Scalding danger! The operating pressure 
must not exceed 3,2 MPa (32 bar) when 
operating with temperatures above 98 °C.

Therefore the following measures must 
definitely be performed:

Replace high pressure nozzle (stain-
less steel) with steam nozzle (brass, 
order see specification).

Open up the pressure/ quantity regula-
tor on the hand spray gun completely, 
dir until stop.

Set the operating pressure on the pump 
unit to the minimum value.

Set temperature regulator to min. 100 °C.

Set dosing value for detergent to "0". 

Set the appliance switch to "1" (opera-
tion with cold water).

Open the hand spray gun and rinse the 
appliance for at least 1 minute. 

Danger

Danger of scalding by hot water. After the 
operation with hot water or steam, the de-
vice must be operated with opened gun 
with cold water for at least two minutes.

Set the appliance switch to "0/OFF“.

Shut off water supply.

Turn on pump shortly (appr. 5 seconds) 
with device switch.

Pull main plug out of socket with dry 
hands only.

Remove water connection.

Activate hand spray gun until device is 
pressure less.

Lock the trigger gun.

Operating with cold water

Eco operation

Operating with hot water/steam

Operating with hot water

Operating with steam

After operation with detergent

Turn off the appliance

31

EN

Summary of Contents for HDS 7/11-4 M


























Reviews: