4
English
5.906-487.0 Rev. 00 (04/10)
Good service work requires extensive and practice-
oriented training as well as well-structured training
materials.
Hence we offer regular basic and advanced training
programmes covering the entire product range for all
service engineers.
In addition to this, we also prepare service manuals
for important appliances - these can be initially used
as instruction guides and later on as reference
guides.
Apart from this, we also regular information about
product enhancements and their servicing.
If you should require supplements, have corrections
or questions regarding this document, please ad-
dress these citing the following subject to:
The responsible product specialist will take care of
your issue.
Copying and duplication of texts and diagrams as
well as third-party access to this information is
permitted only with the explicit permission of the
company:
Alfred Kärcher GmbH & Co. KG
P O Box 160
D -71349 Winnenden
www.kaercher.com
Danger
Immediate danger that can cause severe injury or
even death.
몇
Warning
Possible hazardous situation that could lead to se-
vere injury or even death.
Caution
Possible hazardous situation that could lead to mild
injury to persons or damage to property.
Extremely mobile hot water high pressure cleaners in
the introductory class for commercial use with fre-
quently changing work sites.
–
High performance burner with upright heating coal
and continuous ignition
–
Burner blower and fuel pump directly on the elec-
tric motor
–
2.2 kW
–
Appliance switch with adjustments for cold water/
hot water
–
Pressure switch
–
2-pin air-cooled motor
–
Motor with winding protection
–
3 piston axial pump with stainless steel piston
(diameter=12 mm)
–
Cylinder head made of brass
–
High pressure valves made of stainless steel
–
Suction valves made of plastic
–
Swash plate with axial ball bearing
–
Pressure holding valve
–
Safety block with lack of water fuse
–
without pressure gauge
–
without pressure and volume control
–
Working pressure: 11 MPa (110 bar)
–
Water quantity: 450 l/h
–
Water filter on water inlet
–
Safety valve
–
Water supply temperature: max. 30°C
–
Upright heating coil
–
Temperature increase approx. 50°C
–
Maximum water output temperature: 80°C
–
Heating oil consumption: 2.7 kg/h
–
Exhaust temperature monitor: 280°C
–
Temperature controller 95°C
–
Detergent suction with fine filter from free-standing
container
–
Detergent suction via injector in vacuum
–
Dosing on filter
–
Extended hand spray gun
–
Stainless steel spray pipe, 550 mm
–
3-fold nozzle
–
Hose drum (version UX)
–
Option hourmeter (6.681-010)
no upgrade kit. In addition, cables and insulated
plugs are required. Can be connected as per the
circuit diagram and be placed into the electric box
after the wire clip is removed.
1
Preface
Subject:
Fall 108235
2
Safety instructions
2.1
Hazard levels
3
Technical Features
3.1
General
3.2
Connection performance of appliance
3.3
Electrical system
3.4
Drive
3.5
Pump
3.6
Booster heater
3.7
Cleaner
3.8
Accessories