10
Operations
Assembly Instructions
STEP 1:
Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
STEP 4:
Connect the high pressure
hose to the pump discharge fitting.
Push coupler collar forward until
secure.
STEP 2:
Remove Wand end and
first place the O-ring followed by
the high pressure nozzle as shown.
Replace end of wand.
STEP 5:
Connect garden hose to
the cold water source.
STEP 3:
Remove shipping cap and
install oil dipstick. Check pump oil
level by using dipstick or observe
oil level in oil window (if equipped).
Use 30 wt. non detergent oil.
STEP 6:
Check inlet filters, remove
debris, then connect the garden
hose to pump water inlet.
CAUTION: Do not run the pump
without water or pump damage
will result.
ATTENTION: Ne pas faire
fonctionner la pompe sans eau
pour éviter d'endommager la
pompe.
Karcher HDS 615-617 Operator’s Manual 9.800-103.0 - V
Garden
Hose
Water
Inlet
Spray
Gun
High Pressure
Hose
Wand
High Pressure
Nozzle
Coupler
Downloaded from