13
Operations
Karcher HDS 615-617 Operator’s Manual 9.800-103.0 - V
On-Off
Switch
STEP 7: (Electric Start Models)
Turn the engine
switch to "Start" position.
ON
OFF
START
Engine
Switch
STEP 8: (Electric Start Models)
Turn the key to
the START position, and hold it there until the
engine starts. If the engine fails to start within 5
seconds, release the key, and wait at least 10
seconds before operating the starter again.
Using the electric starter for more than 5
seconds at a time will overheat the starter
motor and can damage it.
When the engine starts, release the key, allowing it
to return to the ON position. If the choke knob has
been pulled to the CLOSED position to start the
engine, gradually push it to the OPEN position as
the engine warms up.
STEP 6:
Pull the starter grip. If the engine fails to
start after 2 pulls, squeeze the trigger gun to release
pressure and repeat step. Return starter gently.
After the engine warms up enough to run smoothly,
move choke to run position and throttle to fast
position.
CAUTION: Small engines may kick back. Do not
hold pull starter grip tightly in hand.
ATTENTION: Les petits moteurs peuvent
présenter un risque de retour.
Burner
Control
STEP 9:
Turn the burner “ON”. Turn thermostat dial to
the 210° mark
WARNING! Never replace nozzle without
engaging the safety latch on the spray gun
trigger.
AVERTISSEMENT: Ne jamais remplacer les buses
sans d'abord mettre le dispositif de sécurité sur
la détente du pistolet pulvérisateur
Safety
Latch
Downloaded from