HDS 600-606 • 9.800-080.0-AB
7
PRESSURE W
ASHER
OPERA
T
OR’S MAN
U
AL
98000800-
Cold
Water
Source
Garden
Hose
98000800-4
98000800-3
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the high pres sure
hose to the spray gun by threading
twist connect onto spray gun inlet.
STEP 3:
Remove shipping cap
and install oil dipstick (Depending
on type of shipping, dipstick may
already be installed). Check pump
oil lev el by us ing dip stick or observe
oil level in oil win dow (if equipped).
Use 30 wt. non detergent oil.
STEP 5:
Connect garden hose to
the cold water source.
STEP 2:
Remove wand end and fi rst
place the o-ring followed by the high
pressure nozzle as shown. Replace
end of wand.
STEP 6:
Check inlet fi lters, remove
debris, then connect the garden
hose to pump water inlet.
CAU TION:
Do not run the pump with out wa-
ter or pump dam age will result.
Spray
Gun
High
Pressure
Hose
Wand
High Pressure
Nozzle
98000800-6
STEP 4:
Connect the high pres sure
hose to the pump discharge fi tting.
Thread twist connect to discharge
fi tting by turning clockwise.
98000800-5
98000800-8
Water
Inlet
Garden
Hose
BATTERY INSTALLATION
Due to Federal Reg u la tions con cern ing ship ment of cor ro sive chem i cals,
batteries are not shipped with this ma chine.
Local purchase of battery will be the responsibility of the owner. Au to mo tive
type 12 Volt Group 24 bat tery is rec om mend ed for place ment with in the
weath er re sis tant box. Fol low safe ty and in stal la tion in struc tions fur nished
with the bat tery.
Red Ca ble is at tached to bat tery (+) pos i tive ter mi nal, black cable is
con nect ed to bat tery (-) neg a tive
terminal.
SHIELD
EYES
EXPLOSIVE
GASES
CAN CAUSE
BLINDNESS OR INJURY
NO
SPARKS
FLAMES
SMOKING
SULFURIC
ACID
CAN CAUSE
BLINDNESS OR
SEVERE BURNS
FLUSH EYES
IMMEDIATELY
WITH WATER
GET
MEDICAL
HELP
FAST
KEEP OUT OF THE REACH OF CHILDREN. DO NOT TIP. KEEP VENT CAPS TIGHT AND LEVEL.
D A N G E R / P O I S O N
Black - Negative
Terminal
Red + Positive
Terminal
Pump
Discharge
Inlet
Filter