HDS Middle Range / HDS Premium Range
Basic Settings and Service Procedures
Service Manual 04.2008
Page 99 / 127
3.7
Removing the hose reel
3.7.1 Replacing the high-pressure hose
– Switch off unit and release pressure.
– Completely unwind hose from the hose reel.
– Turn the hose reel until the bolted-on half-shell
(1) points upwards. Remove both screws (2)
and remove loosened half-shell (1).
– Lever out the retaining clip for the high-pressure
hose (3) and pull out the hose.
– Insert new hose through the hose guide
provided and the deflection pulley on the
underside of the unit.
– Completely push the hose nipple into the
connection piece of the hose reel and secure
with retaining clip (3).
– Re-install the bolt-on half-shell.
Hose reel, bolt-on half-shell
2
1
Remove retaining clip, high-pressure hose
3
1 Bolt-on half-shell, hose reel
2 Retaining screws, half-shell
3 Retaining clip, high-pressure hose