HDS Middle Range / HDS Premium Range
Basic Settings and Service Procedures
Service Manual 04.2008
Page 103 / 127
3.8
Removing the pressure gauge
Push in left-hand retaining clip by hand.
Removing the pressure gauge
– Remove control panel retaining screws and
open control panel.
– Push in the left-hand retaining clip (3) behind
the pressure gauge (1) by hand.
– Push in the right-hand retaining clip (4) with a
screwdriver (2) and remove the pressure
gauge (1).
– If necessary, undo the pressure gauge hose
(5).
Push in right-hand retaining clip with screwdriver.
Remove pressure gauge.
1
1
2
3
4
5
1
1 Pressure gauge
2 Screwdriver
3 Retaining clip, LH
4 Retaining clip, RH
5 Pressure gauge hose