![background image](http://html2.mh-extra.com/html/karcher/hds-1-7-12-u-ed/hds-1-7-12-u-ed_operating-instructions-manual_4157393012.webp)
– 7
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Danger
Risk of injury! Risk of tipping with high in-
clines, if the inclination is too large to the
side and with unstable surfaces.
–
The appliance should only be used on
gradients of max. 2%.
–
Only use the machine on sound surfac-
es.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Lay the appliance on its rear prior to
transporting it and drain the residual
water.
Pull the device behind you at the carry-
ing handle for transporting it over longer
distances
To carry, hold the appliance by the han-
dles and the pushing handle.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Set the appliance switch to "0/OFF“.
Shut off water supply.
Turn on pump shortly (appr. 5 seconds)
with device switch.
Set the appliance switch to "0/OFF“.
Activate hand spray gun until device is
pressure less.
Pull main plug out of socket with dry
hands only.
Remove water connection.
Lock the trigger gun.
Allow device to cool down.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Clean filter in the water connection.
Clean filter at the detergent suck hose.
Remove the filter.
Clean filter in water and reinstall.
Clean filter in water and reinstall.
Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
If malfunction can not be fixed, the de-
vice must be checked by customer serv-
ice.
–
No power
Check power connection/conduit.
–
Engine overload/overheat
Set the appliance switch to "0/OFF“.
Allow device to cool down.
Turn on the appliance.
If malfunction still occurs, have device
checked by customer service.
–
The exhaust temperature limiter has
been triggered, heating coil is sooted.
Storage
Transport
Maintenance and care
Safety inspection/ maintenance
contract
Maintenance intervals
Weekly
Monthly
Maintenance Works
Clean filter in the water connection.
Clean filter at the detergent suck hose
Troubleshooting
Appliance is not running
12
EN
Summary of Contents for HDS 1.7/12 U Ed
