background image

– 4

Warning

Observe regulations of water supplier. 
According to the applicable regula-
tions, the appliance must never be 
used on the drinking water supply 
without a system separator. Use a 
suitable system separator manufactured by 
KÄRCHER; or, as an alternative, a system 
separator as per EN 12729 Type BA. Water 
flowing through a system separator is con-
sidered non-drinkable. 

Caution

Always connect the system separator to 
the water supply, never directly to the appli-
ance!

For connection values refer to technical 
specifications

Connect the supply hose (minimum 
length 7.5 m, minimum diameter 1“) to 
the water connection point of the appli-
ance (such as the tap).

Note

The supply hose is not included.

Open the water supply.

Screw the suction hose (order no. 
4.440-270.0) onto the water connec-
tion.

Connect filter (order-no. 4.730-012.0) to 
suction hose.

Deaerate the appliance:
Unscrew the nozzle. 
Switch on the appliance and let it run 
until the water exiting is bubble-free. 
At the end let the appliance run for ap-
prox. 10 seconds - then switch off. Re-
peat the procedure for a couple of 
times.

Switch off the appliance and fit the noz-
zle again. 

Danger

Risk of explosion!
Do not spray flammable liquids.
If the appliance is used in hazardous areas 
(e.g. filling stations) the corresponding 
safety provisions must be observed.

Warning

Clean engines only at places with corre-
sponding oil separators (environmental 
safety).
The jet must not be directed at other per-
sons or directed by the user at him/herself 
to clean clothing or footwear.
Risk of blocking. Place the nozzles in the 
accessory compartment with their joint 
pointing upward.

Only HD 9/19....

Danger

Long hours of using the appliance can 
cause circulation problems in the hands on 
account of vibrations. 

It is not possible to specify a generally valid 
operation time, since this depends on sev-
eral factors:

Proneness to blood circulation deficien-
cies (cold, numb fingers).

Low ambient temperature. Wear warm 
gloves to protect hands.

A firm grip impedes blood circulation.

Continuous operation is worse than an 
operation interrupted by pauses.

In case of regular, long-term operation of 
the device and in case of repeated occur-
rence of the symptoms (e.g. cold, numb fin-
gers) please consult a physician.

Water connection

Connection to the water supply

Drawing in water from open reservoirs

Operation

22

EN

Summary of Contents for HD 7/12-4 M

















Reviews: