Kärcher HD 5/15 C, Manual

Page: 7 / 96

– 2
1 Multiple nozzle
2 High-pressure nozzle / chemicals noz-
zle
3 Trigger gun with spray lance and high-
pressure hose
4 Injector
5 High-pressure connection of the high-
pressure cleaner
The injector suctions cleaning agents and
mixed them into the water stream.
 Switch off the high pressure cleaner.
 Interrupt current and water inflow.
 Activate trigger gun until device is pres-
sure-less.
 Screw the injector to the high-pressure
outlet and tighten the union joint (max.
10 Nm).
 Screw the high-pressure hose to the in-
jector outlet and tighten fingertight.
 Replace the high-pressure nozzle by
the included chemicals nozzle.
or
Switch multiple nozzle to position
"CHEM".
1 Dosing cover
2 Hose nipple
3 Injector
4 Detergent suction hose with filter
 Select the dosing cover for the desired
detergent concentration.
Note:
Diagrams for the selection of the dosing
cover are listed at the end of these operat-
ing instructions.
 Insert the dosing cover into the hose
nipple.
 Slide the detergent suction hose onto
the hose nipple.
Overview
Function
Assembly
Detergent dosing unit
7 EN