background image

– 6

Please arrange for the immediate ex-
change of a damaged high-pressure 
hose.

Check appliance (pump) for leaks.
3 drops per minute are permitted and 
can come out from the lower side of the 
appliance. Call Customer Service if 
there is heavy leakage. 

Clean the sieve in the water connection.

Take out sieve.

Clean the sieve from the outside and 
rinse it.

Insert sieve.

DANGER

Risk of injury by inadvertent startup of ap-
pliance and electrical shock.

Prior to all work on the appliance, 
switch off the appliance and pull the 
power plug.

Get the electrical components checked 
and repaired only by authorised cus-
tomer service persons.

Contact an authorised customer service 
person in case of problems not men-
tioned in this chapter or if you are in 
doubt or when you have been explicitly 
asked to do so.

Check connection cable for damages.

Check the supply voltage.

If the appliance is overheated:
Set the appliance switch to "0".
Allow machine to cool down at least for 
15 minutes. 
Set the appliance switch to "1".

Call Customer Service in case of elec-
trical defects.

Check the nozzle size, install correct 
nozzle.

Deaerate the appliance (see "Start-up")

Clean the sieve in the water connection.

Check water supply level (refer to tech-
nical data).

Clean the nozzle.

Replace the nozzle.

Contact Customer Service if needed.

3 drops of water per minute are permitted 
and can leak from the bottom of the appli-
ance.

With stronger leak, have device 
checked by customer service.

Check the water suction pipe for leaks.

Deaerate the appliance (see "Start-up")

Contact Customer Service if needed.

– Only use accessories and spare parts 

which have been approved by the man-
ufacturer. The exclusive use of original 
accessories and original spare parts 
ensures that the appliance can be oper-
ated safely and trouble free.

– At the end of the operating instructions 

you will find a selected list of spare parts 
that are often required. 

– For additional information about spare 

parts, please go to the Service section 
at www.kaercher.com. 

The warranty terms published by the rele-
vant sales company are applicable in each 
country. We will repair potential failures of 
your appliance within the warranty period 
free of charge, provided that such failure is 
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim 
please contact your dealer or the nearest 
authorized Customer Service centre. 
Please submit the proof of purchase.

Weekly

Clean the sieve in the water connection

Troubleshooting

Appliance is not running

Pressure does not build up in the 

appliance

Pump leaky

Pump is vibrating

Accessories and Spare Parts

Warranty

17

EN

Summary of Contents for HD 5/11 P












Reviews: