background image

– 4

DANGER

Risk of explosion!
Do not spray flammable liquids.
If the appliance is used in hazardous areas 
(e.g. filling stations) the corresponding 
safety regulations must be observed.

CAUTION

Environmental damage. Clean motors at 
places with a corresponding oil separator 
only.

DANGER

Long hours of using the appliance can 
cause circulation problems in the hands on 
account of vibrations.

It is not possible to specify a generally valid 
operation time, since this depends on sev-
eral factors:
– Proneness to blood circulation deficien-

cies (cold, numb fingers).

– Low ambient temperature. Wear warm 

gloves to protect hands.

– A firm grip impedes blood circulation.
– Continuous operation is worse than an 

operation interrupted by pauses.

In case of regular, long-term operation of 
the device and in case of repeated occur-
rence of the symptoms (e.g. cold, numb fin-
gers) please consult a physician.

The appliance can be operated in a vertical 
or horizontal position.

Note:

The appliance is equipped with a pressure 
switch. The motor starts up only when the 
lever of the pistol is pulled

Set the appliance switch to "I".

Unlock the trigger gun and pull the lever 
of the gun.

Release the lever of the trigger gun; the 
device will switch off.

Release again the lever of the trigger 
gun; the device will switch on again.

Set the appliance switch to "0".

Disconnect the mains plug from the 
socket.

Shut off water supply.

Activate trigger gun until device is pres-
sure-less.

Press the safety lever of the trigger gun 
to secure the lever of the pistol against 
being released accidentally.

Place the spray lance with the trigger 
gun into the quiver for the spray lance 
and snap it into place in the spray lance 
holder.

Wind the connection cable around the 
cable holder.

Fasten the plug with the mounted clip.

Slide in push handle.

Wind up the high-pressure hose and 
hang it over the hose storage.

ATTENTION

Frost will destroy the not completely water 
drained device.

Store the appliance in a frost free area.

Drain water. 

Pump in conventional frost protection 
agents through the appliance. 

Note:

Use normal glycol-based anti-freezing 
agents for automobiles. 
Observe handling instructions of the anti-
freeze agent manufacturer.

Operate device for max. 1 minute until 
the pump and conduits are empty.

Operation

Operation

Interrupting operation

Turn off the appliance

Storing the Appliance

Frost protection

If you cannot store it in a frost-free 
place:

15

EN

Summary of Contents for HD 5/11 P












Reviews: