9.800-087.0 • Rev. 10/09
7
PRESSURE WASHER
OPERATOR’S MANUAL
ASSEMbLy INSTRUCTIONS
STEP 1: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
STEP 6: Pull the spring-loaded
collar of the wand coupler back
to insert your choice of pressure
nozzle. Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
STEP 5: Connect the high pressure
hose to the pump discharge fitting.
Push coupler collar forward until
secure.
STEP 2: Attach nozzle extension
to spray gun/wand. Tighten both
by hand.
STEP 3: Connect garden hose to
the cold water source.
Before installing nozzle, turn on wa-
ter supply and run machine allowing
water to flush through the system
until clear.
STEP 3: Connect the garden hose
to pump water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
Safety
Latch
Spray
gun
High Pressure
Hose
Nozzle
Extension
Spray gun/Wand
Pressure
Nozzle
Wand
Coupler
Coupler
Collar
Pump
Discharge
fitting
High
Pressure
Hose
Cold
Water
Source
garden
Hose
Pump
Water
Inlet
garden
Hose
Coupler Collar
Summary of Contents for HD 2.3/24 P / CD-23243
Page 2: ......
