![background image](http://html1.mh-extra.com/html/karcher/hd-2-0-1000/hd-2-0-1000_service-manual_4078367007.webp)
9.808-246.0-A • Dual Mister Service Manual
7
PRESSURE W
ASHER
SER
VICE MANU
AL
OPERATING INSTRUCTIONS FOR HIGH PRESSURE MODE
STEP 4:
Attach the high pressure
hose to the spray gun.
STEP 7:
Close metering valve to
purge hose.
CAUTION: If valve is open, pres-
sure wont reach rate
STEP 5:
Attach wand to spray gun.
STEP 6:
Pull spring-loaded collar
of the wand coupler back to insert
your choice of pressure nozzle.
STEP 1:
Connect ½” hose to cold
water inlet.
STEP 2:
Check inlets filters, remove
debris, then connect the garden
hose to pump water inlet.
CAUTION: Do not run the pump
without water or pump damage
will result.
STEP 3:
Connect ¼” high pressure
hose to the discharge nipple. Push
coupler collar forward until secure.
Wand
Wand
Coupler
Pressure
Nozzle
Pressure
Nozzle
Wand
Coupler
Coupler
Collar
Discharge
Nipple
High
Pressure
Hose
Cold
Water
Source
Garden
Hose
Pump
Water Inlet
Garden
Hose
Coupler Collar
STEP 8:
Close valve for high
pressure mode.
STEP 10:
Start up the machine.
Spray
Gun/Wand
STEP 9:
Connect to apropriate
power supply. Push reset button
on GFCI.
Safety
Latch
Spray
Gun
High
Pressure Hose