background image

9.808-246.0-A • Dual Mister Service Manual

    

PRESSURE 

W

ASHER   

SER

VICE MANU

AL

4

INTRODUCTION & IMPORTANT SAFETY INFORMATION

Thank you for purchasing this Pressure Washer.
We reserve the right to make changes at any time 
without incurring any obligation.

Owner/User Responsibility:

The owner and/or user must have an understanding of 
the manufacturer’s operating instructions and warnings 
before using this pressure washer. Warning information 
should be emphasized and understood. If the operator 
is not fluent in English, the manufacturer’s instructions 
and warnings shall be read to and discussed with 
the operator in the operator’s native language by the 
purchaser/owner, making sure that the operator com-
prehends its contents.
Owner and/or user must study and maintain for future 
reference the manufacturers’ instructions.
The operator must know how to stop the machine 
quickly and understand the operation of all controls. 
Never permit anyone to operate the engine without 
proper instructions.

SAVE THESE INSTRUCTIONS 

This manual should be considered a permanent 
part of the machine and should remain with it if 
machine is resold.
When ordering parts, please specify model and 
serial number. Use only identical replacement parts.
This machine is to be used only by trained operators.

IMPORTANT SAFETY 

INFORMATION

READ OPERATOR’S 

MANUAL THOROUGHLY 

PRIOR TO USE.

WARNING: To reduce the risk of 

injury, read operating instruc-
tions carefully before using.

 

1.  Read the owner's manual 
thoroughly. Failure to follow instruc-
tions could cause malfunction of 
the machine and result in death, 
serious bodily injury and/or prop-
erty damage.
 

2.  Know how to stop the ma-

chine and bleed pressure quickly. Be thoroughly 
familiar with the controls.

  3.  Stay alert — watch what you are doing.
  4. All installations must comply with local codes. 

Contact your electrician, plumber, utility company 
or the selling distributor for specific details. If your 
machine is rated 250 volts or less, single phase will 
be provided with a ground fault circuit interrupter 
(GFCI). If rated more than 250 volts, or more than 
single phase this product should only be connected 
to a power supply receptacle protected by a GFCI.

DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of elec-
trocution. Check with a qualified electrician or 
service personnel if you are in doubt as to whether 
the outlet is properly grounded. Do not modify the 
plug provided with the product - if it will not fit the 
outlet, have a proper outlet installed by a qualified 
electrician. Do not use any type of adaptor with 
this product

WARNING

KEEP WATER 

SPRAY AWAY FROM 

ELECTRICAL WIRING.

WARNING: Keep wand, hose, and 

water spray away from electric 
wiring or fatal electric shock may 
result.

5.    To protect the operator from  
 

electrical shock, the machine  

 

must be electrically grounded.  

 

It is the responsibility of the  

 

owner to connect this machine 

to a UL grounded receptacle of proper voltage and 
amperage ratings. Do not spray water on or near 
electrical components. Do not touch machine with 
wet hands or while standing in water. Always dis-
connect power before servicing.

RISK OF EXPLOSION: 

DO NOT SPRAY  

FLAMMABLE LIQUIDS.

WARNING

WARNING: Flammable liquids 

can create fumes which can ig-
nite, causing property damage 
or severe injury.
WARNING: Risk of explosion — 
Do not spray flammable liquids.

 
 

6. Do not allow acids, caustic 

or abrasive fluids to pass through the pump.

  7. Never run pump dry or leave spray gun closed 

longer than 1-2 minutes.

  8.  Keep operating area clear of all persons.

WARNING

        

USE PROTECTIVE  

EYE WEAR 

AND CLOTHING  

WHEN OPERATING 

THIS EQUIPMENT.

WARNING: High pressure spray 

can cause paint chips or other 
particles to become airborne 
and fly at high speeds. To avoid 
personal injury, eye, hand and 
foot safety devices must be 
worn.

9.  Eye, hand, and foot protec-
tion must be worn when using this 
equipment.

Summary of Contents for HD 2.0/1000





















Reviews: