background image

5

  * only  1.951-801 UL

To Test the GFCI

1. Insert the plug into grounded electrical outlet.

2. Press the reset button.

3. Press the test button. The reset button pops up.

4. Press the reset button again for use.

Do not use if the above test fails.

IMPORTANT SAFETY INSTRUCTIONS

GROUNDING INSTRUCTIONS

This product must be grounded. If it should
malfunction or breakdown, grounding provides
a path of least resistance for electric current to
reduce the risk of electric shock. This product is
equipped with a cord having an equipment-
grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet
that is properly installed and grounded in
accordance with all local codes and ordinances.

DANGER

- Improper connection of the equipment-

grounding conductor can result in a risk of
electrocution. Check with a qualified
electrician or service personnel if you are
in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided
with the product

- if it will not fit the outlet, have a proper

outlet installed by a qualified electrician.
Do not use any type of adaptor with this
product.

EXTENSION CORDS

Use only 3-wire extension cords that have
3-prong grounding-type plugs and 3-pole cord
connectors that accept the plug from the product.
Use only extension cords that are intended for
outdoor use. These extension cords are identified
by a marking “Acceptable for use with outdoor
appliances; store indoors while not in use.” Use
only extension cords having an electrical rating
not less than the rating of the product. Do not use
damaged extension cords. Examine extension
cord before using and replace if damaged. Do not
abuse extension cord and do not yank on any
cord to disconnect. Keep cord away from heat
and sharp edges. Always disconnect the
extension cord from the receptacle before
disconnecting the product from the extension
cord.
Important:  When using an extension cord always
unwind cord completely.

WARNING

To reduce the risk of electrocution, keep all
connections dry and off the ground. Do not
touch plug with wet hands.

WARNING

Risk of Injection or Injury
- Do Not Direct Discharge Stream At Persons.

High Pressure jets can be dangerous if subject to
misuse. The jet must not be directed at persons,
animals or machine itself. This machine has
been designed for use with cleaning chemicals
supplied or recommended by the manufacturer.
The use of other cleaning chemicals may affect
the operation of the machine and void the
warranty.

Summary of Contents for HD 1090














Reviews: