![background image](http://html2.mh-extra.com/html/karcher/hd-1090/hd-1090_service-handbook_3833971030.webp)
28
Troubleshooting and basic settings
Oil escaping between cylinder head and housing
Install oil seals
Remove oil seals
Dismantling housing
– Remove the housing with pistons and springs.
– Carefully lever out the oil seals from the hou-
sing.
Note:
Do not damage the sealing surface. All
parts must be checked for damage. Replace
if necessary.
– Lay new oil seals in water for some time before
mounting.
– Using the mounting mandrel (special tool),
mount the oil seal in the piston housing without
grease or oil.
– Pay attention to the mounting position of the
seal: the sealing lip must point to the mounting
mandrel.
– Oil the piston and assemble with springs.
Grease the O-ring with silicone grease.
– Mount the piston housing with mounting bolts
in the reverse order, paying attention to the
torque (see technical data).
– Add new oil (see technical data).
Defective oil seal on piston
– Drain the oil into a suitable container.
– Remove the cylinder head.
– Replace both housing bolts with 2 mounting
bolts (special tools).
– Using the mounting bolts, loosen the housing
maintaining an even spring pressure against
the pistons, making sure that the housing is
not canted.
Summary of Contents for HD 1090
