![background image](http://html2.mh-extra.com/html/karcher/hd-1090/hd-1090_service-handbook_3833971020.webp)
18
Troubleshooting and basic settings
Unit does not reach required pressure
Disassemble changeover nozzle
Pull out water inlet strainer
Check water supply quantity
Insufficient water supply
– The water inlet hose must be at least 3/4 inch
in diameter.
– Check the water inlet quantity (see technical
data).
Water inlet strainer blocked
– Pull out the water inlet strainer with pliers and
clean. Replace if necessary.
High-pressure nozzle insert washed out
– Disassemble the changeover nozzle. If ne-
cessary replace the nozzle inserts.
Note:
If the nozzle insert is washed out, the unit
cannot build up the full operating pressure.
12
11
10
9
8
7
6
5
4
3
2
1
1
o
Summary of Contents for HD 1090
