![background image](http://html2.mh-extra.com/html/karcher/g-4-10-m/g-4-10-m_original-instructions-manual_4047381014.webp)
-
6
Mount loose parts delivered with appliance prior
to start-up.
Illustrations on Page 2
Illustration
Î
Fasten the transport handle to the frame.
Align the holes in such a way that the screws
can pass through and then fasten the nuts.
Illustration
Î
Attach the accessories holder.
Illustration
Î
Push the high pressure hose into the trigger
gun until it locks audibly.
Note:
Make sure the connection nipple is
aligned correctly.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply with-
out a system separator. Use a suitable
system separator manufactured by KÄRCHER;
or, as an alternative, a system separator as per
EN 12729 Type BA. Water flowing through a sys-
tem separator is considered non-drinkable.
Note:
Impurities in the water can damage the
high-pressure pump and accessories. For pro-
tection, the use of the KÄRCHER water filter (op-
tional accessory, order no. 4.730-059) is
recommended.
Observe regulations of water supplier.
For connection values, see type plate/technical
data.
Î
Use a fibre-reinforced water hose (not in-
cluded) with a standard coupling. (Minimum
diameter 1/2 inch (13 mm), minimum length
7.5 m).
Î
Screw the coupling element (supplied) to the
water connection on the appliance.
Î
Push the water supply hose onto the cou-
pling unit, then connect it to the water supply.
This high-pressure cleaner is suited to work with
the KÄRCHER suction hose with backflow valve
(Optional accessory, order no. 4.440-238) to
draw in surface water, e.g. from water butts or
ponds (see specifications for max. suction
height).
Î
Fill the KÄRCHER suction hose with back-
flow valve with water, screw to water supply
and hang into the water butt.
Î
Separate the high pressure hose from the
high pressure connection of the appliance.
Î
Appliance ventilation.
Let the appliance run when the high-pres-
sure hose is not connected and run it until
the water which discharges from the high-
pressure outlet is free of bubbles. Switch off
appliance and reconnect high-pressure
hose.
Caution
Dry runs lasting longer than two minutes lead to
damages to the high pressure pump. If the appli-
ance does not build up pressure within two min-
utes, switch it off and proceed as instructed in
the Chapter "Troubleshooting".
Caution
The appliance is delivered without engine oil.
Please fill in engine oil before using the appli-
ance for the first time.
Î
Fill up the fuel tank and check the oil level.
See Operating Instructions of motor.
Î
Connect the high pressure hose to the high
pressure connection of the appliance.
Î
Push the spray lance into the trigger gun and
fasten it by turning it through 90°.
Î
Completely open the water tap.
Î
Start the motor.
See Operating Instructions of motor.
Before Startup
Water supply
Water supply from mains
Drawing in water from open reservoirs
Start up
14
EN
Summary of Contents for G 4.10 M
