background image

      

 

English  

13

CLEANING TIPS

Optional accessories are available to further 

enhance your cleaning capabilities. These acces-

sories are accurate as of the printing date of this 

manual. Please check our website:  

 

www.karcher.com.au & www.karcher.co.nz 

for 

up-to-date information.

–  

Extension Hose

–  

DirtBlaster® Spray Nozzle

–  

Universal Wash Brush Kit

(with or without detergent). 

Pre-rinse cleaning 

surface with fresh water. If using Kärcher Pres-

sure Wash or Degreaser, apply to surface at low 

pressure. For best results, limit your work area to 

smaller sections of approximately 2.3 square me-

ters. Allow Pressure Wash or Degreaser to remain 

on surface 1-3 minutes. Do not allow detergent to 

dry on surface. Rinse at high pressure in a sweep-

ing motion keeping the spray nozzle approximately 

8 - 15 cm inches from the cleaning surface. Always 

clean from top to bottom and from left to right. For 

removing extremely stubborn stains, use a Dirt-

Blaster® Spray Nozzle (sold separately).

(with or without detergent). 

 Pre-rinse vehicle 

with fresh water. If using Kärcher Vehicle Wash, 

apply to surface at low pressure. For best results, 

clean one side of vehicle at a time and always 

apply detergent from bottom to top, do not allow 

detergent to dry on surface. If needed, use special 

wash brush attachment (not included) to remove 

stubborn dirt. Rinse at high pressure in a sweeping 

motion keeping the spray nozzle approximately 15 

- 20 cm from the cleaning surface (distance should 

increase when rinsing pin-striping or other sensitive 

surfaces). Always clean from top to bottom and 

from left to right. For best results, wipe surface dry 

with a chamois or soft dry cloth.

(with or without detergent). 

 Pre-rinse furniture 

and surrounding area with fresh water. If using 

Pressure Wash, apply to surface at low pressure. 

Allow Pressure Wash to remain on surface 1-3 

minutes. Do not allow detergent to dry on surface. 

If needed use special Wash Brush Attachment (not 

included) to remove stubborn dirt. Rinse at high 

pressure in a sweeping motion keeping the spray 

nozzle approximately 8 - 15 cm from the cleaning 

surface. For best results, clean from top to bottom 

and from left to right.

     Before cleaning any surface an inconspicuous  

area should be cleaned to test spray pattern 

and distance for maximum cleaning results.

     If painted surfaces are peeling or chipping, 

use extreme caution as pressure washer may 

remove the loose paint from the surface.

     When using on surfaces which might come in 

contact with food, fl ush surfaces with plenty 

of drinking water.

     For additional cleaning tips, visit our website at 

www.karcher.com.au or www.karcher.co.nz

(with or without detergent). 

Pre-rinse cleaning 

surface with fresh water. If using Kärcher Pressure 

Wash or Degreaser, apply detergent at low pres-

sure. Allow Pressure Wash to remain on surface 

1-3 minutes. Do not allow detergent to dry on 

surface. Rinse at high pressure keeping the spray 

nozzle approximately 8 - 15 cm from the cleaning 

surface. For removing extremely stubborn dirt, it 

may be necessary to move the spray nozzle even 

closer to the surface for greater dirt cutting action.

Cement Patios, Brick and Stone

Cars, Boats & Motorcycles

Patio & Lawn Furniture

Recommendations

Optional Accessories

Barbecue Grills, Outdoor Power 

Equipment & Gardening Tools

Summary of Contents for G 3050 OH

















Reviews: