background image

12

 English

The color-coded quick connect 
nozzles provide a wide array of spray 
widths from 0° to 65° and are easily 
accessible when placed in the 
convenient nozzle holder.

0° spray angle = Red nozzle

For particularly stubborn accumulation 
of grime.  Not recommended for soft 
materials like sidings, decks, painted 
surfaces, cars.

15° spray angle = Yellow nozzle

For dirt accumulation over a surface.

25° spray angle = Green nozzle

For dirt accumulation over a large 
surface.

40° spray angle = White nozzle

For moderate dirt accumulation over a 
large surface.

Soap = Black nozzle

For operating with detergents or 
cleaning with low pressure.

High pressure in nozzle area. Risk of 
injury caused by improperly locked 
nozzle.

Make sure you hear the "click" when 
inserting the nozzle tip into the quick 
connection.

Pull the nozzle to make sure it is 
seated properly before operating your 
unit.

To avoid serious injury never point 
spray nozzle at yourself, other 
persons or animals.

Detergents can only be applied with 
the black detergent nozzle.

Install the black detergent nozzle for 
detergent application at low pressure.

Fill the detergent tank with Kärcher 
Brand Detergent.

Using the Accessories

Quick Connect Nozzles

Working with Detergents

Summary of Contents for G 2700





















Reviews: