background image

      

 

English  

13

Symptom Cause

Solution

ENGINE WILL NOT 

START

No gasoline

Fill gas tank

Choke is not in the correct 

position

Slide choke lever out to closed position

Water pressure built up in 

the machine

Squeeze the trigger to release the pressure

For additional engine problems refer to the engine manual.

UNIT DOES NOT 

REACH HIGH 

PRESURE

Diameter of garden hose is 

too small

Replace with a 5/8 inch or larger garden hose

Water supply is restricted

Check garden hose for kinks, leaks and
blockage

Not enough inlet water 

supply

Turn water on full force. Check garden hose

for kinks, leaks or blockage.

Water inlet fi lter is clogged

Remove fi lter and rinse out in warm water

Black detergent nozzle is 

attached

Remove black detergent nozzle and attach

high pressure nozzle

OUTPUT PRES-

SURE

VARIES HIGH AND 

LOW

Not enough inlet water 

supply.

Turn water on full force. Check garden hose
for kinks, leaks or blockage

Pump is sucking air

Check that hoses and fi ttings are air tight.

Turn off machine and purge pump by

squeezing trigger gun until a steady fl ow of

water emerges through the nozzle

Water inlet fi lter is clogged

Remove fi lter and rinse out in warm water

Spray nozzle is obstructed

Blow out or remove debris with a fi ne needle

Calcifi ed gun, hose or 

spray wand

Run distilled vinegar through detergent 

suction tube.

 CAUTION

Remove the spark plug cable to prevent accidental ignition of the 

engine before making any repair

TROUBLESHOOTING

Summary of Contents for G 2500 DH















Reviews: