background image

10

  English

  

STEP 

6:

 

  Disconnect the garden hose from the water 

inlet on the unit.

  

STEP 

7:

 

  Disconnect the high pressure hose from the 

high pressure outlet. Store the high pressure 
hose in the nozzle holder assembly.

 CAUTION

This unit has been designed for use with cleaning 
detergents recommended by the manufacturer.

The use of other cleaning detergent may affect the 
operation of the machine and void the warranty.

Always Use Kärcher Detergent for Best Results

Kärcher biodegradable detergents are specially 
formulated to protect the environment and your 
pressure washer. The special formula won`t clog 
the suction tube fi lter and will protect the internal 
parts of the pressure washer for a longer life. For 
Kärcher Detergents, check your retailer or visit 
our website:

www.karcherresidential.com/detergents

 CAUTION

Never use:

–    Bleach, Chlorine products and other corrosive 

chemicals

–    Liquids containing solvents (i.e., paint thin-

ners, gasoline, oils.)

–    Tri-sodium phosphate products

–  

Ammonia 

products

–  

Acid-based 

products

These chemicals will harm the unit and will damage 

the surface being cleaned.

Use of these items will void the warranty.

  

STEP 

1:

 

  Remove detergent suction tube from con-

tainer and insert into 1 gallon of fresh water.

 

  Siphon water at low pressure for one min-

ute.

  

STEP 

2:

 

  Move the engine stop switch to the OFF posi-

tion. Close the fuel valve.

  

STEP 

3:

 

  Turn off the water source.

  

STEP 

4:

 

  Press trigger to release water pressure.

  

STEP 

5:

 

  Release trigger and engage gun safety lock.

  

STEP 

1:

Move the engine stop switch to the OFF position.

  

STEP 

2:

 

  Release trigger and engage safety lock.

For engine details see engine manual.

Detergents

TAKING A BREAK ...fi ve minutes or more

SHUTTING DOWN & CLEAN-UP

Summary of Contents for G 2500 DH















Reviews: