background image

4

  English

IMPORTANT SAFETY INSTRUCTIONS

   

Read the operating instructions of the engine 

manufacturer before start-up and follow the 

safety instructions carefully.

 

WARNING

When using this product, basic precautions should 

always be followed, including the following:

   

Read all instructions before using product.

   

To reduce the risk of injury, close supervision 

is necessary when a product is used near 

children.

   

Know how to stop the product and bleed pres-

sures quickly. Be thoroughly familiar with the 

controls. 

    Stay alert – watch what you are doing. 

   

Do not operate when fatigued or under the 

infl uence of alcohol or drugs.

■ 

  Keep operating area clear of all persons.

   

Do not overreach or stand on unstable sup-

port. Keep good footing and balance at all 

times.

    Wear safety goggles and ear protection.

    Follow the maintenance instructions specifi ed 

in the manual.

    To avoid risks, all repairs and replacement 

of spare parts should only be carried out by 

trained personnel.

 

WARNING

 

  Risk of Injection or Injury – Do Not Direct  

Discharge Stream At Persons.

     High pressure jets can be dangerous if mis-

used. The jet must not be directed at persons, 

animals, electrical devices, or the unit itself. 

  

 

DANGER

 

  Do not spray electrical connections, electrical 

outlets or fi xtures.

 

 

WARNING

 

 

Risk Of Explosion –Do not spray fl ammable 

liquids. Operate only where open fl ame or 

torch is permitted.

    Do not use acids, solvents, or any alkaline   

or fl ammable material in this product. These 

products can cause physical injuries to the 

operator and irreversible damage to the ma-

chine.

 

 

WARNING

 

  Gun Kicks Back – Hold with both hands.

■  

The Trigger Gun Safety Lock prevents the  

trigger from accidentally being engaged. This 

safety feature must be engaged when replac-

ing nozzles or not in use.

 

 

WARNING

 

  The engine exhaust from this product contains 

chemicals known to the State of California to 

cause cancer, birth defects or other reproduc-

tive harm. Operation of this equipment may 

create sparks that can start fi res around dry 

vegetation. A spark arrestor may be required. 

Operator should contact local fi re agencies for 

laws or regulations.

 

 

CAUTION

 

 

Risk of Asphyxiation – Use this product only 

in a well ventilated area.

    Operate and fuel machine in a well ventilated 

area, free of devices featuring an open pilot 

or fl ame such as boilers, water heaters, etc.

 

 

CAUTION

 

  Risk of Fire – Do not add fuel when the prod-

uct is operating or still hot.

 

 

CAUTION

 

 

Risk of fi re - Do not put container with fl am-

mables products into the nozzle holder.

    Do not operate if fuel has been spilled. In-

stead, move machine to different location and 

avoid creating sparks.

    This machine has hot surfaces which can 

cause burns. Operate in a safe environment 

and away from children.

    Do not touch hot surfaces or allow accessories 

to contact hot surfaces.

    Do not leave machine running unattended.

     Avoid tipping machine on its side.

SAVE THESE  INSTRUCTIONS

Summary of Contents for G 2500 DCE















Reviews: