background image

10

  English

  

STEP 

1:

Move the engine stop switch to the OFF position.

  

STEP 

2:

 

  Release trigger and engage safety lock.

For engine details see engine manual.

Detergents

TAKING A BREAK ...fi ve minutes or more

SHUTTING DOWN & CLEAN-UP

 CAUTION

This unit has been designed for use with cleaning 
detergents recommended by the manufacturer.

The use of other cleaning detergent may affect the 
operation of the machine and void the warranty.

Always Use Kärcher Detergent for Best Results

Kärcher biodegradable detergents are specially 
formulated to protect the environment and your 
pressure washer. The special formula won`t clog 
the suction tube fi lter and will protect the internal 
parts of the pressure washer for a longer life. For 
Kärcher Detergents, check your retailer or visit 
our website:

www.karcherresidential.com

 CAUTION

Never use:

–    Bleach, chlorine products or other corrosive 

chemicals

–    Liquids containing solvents (i.e., paint thin-

ners, gasoline, oils.)

–    Tri-sodium phosphate products

–  

Ammonia 

products

–  

Acid-based 

products

These chemicals will harm the unit and will damage 

the surface being cleaned.

Use of these items will void the warranty.

  

STEP 

6:

 

  Disconnect the garden hose from the water 

inlet on the unit.

  

STEP 

7:

 

  Disconnect the high pressure hose from the 

high pressure outlet. Store the high pressure 
hose in the nozzle holder assembly.

  

STEP 

1:

 

  If detergents have been used, remove deter-

gent suction tube from container and insert 
into 1 gallon of fresh water.

 

  Siphon water at low pressure for one minute 

to clear the line of residual detergent.

  

STEP 

2:

 

  Move the engine stop switch to the OFF posi-

tion. Close the fuel valve.

  

STEP 

3:

 

  Turn off the water source.

  

STEP 

4:

 

  Press trigger to release water pressure.

  

STEP 

5:

 

  Release trigger and engage gun safety lock.

WORKING WITH DETERGENTS

 

 

STEP 3:

 

  With the engine running, pull trigger to operate 

unit.

 

  Liquid detergent is drawn into the unit and 

mixed with water.

 

  Apply detergent to work area.

 

  Do not allow detergent to dry on surface.

 

 

STEP 4:

 

 

Always

 draw fresh water through the deter-

gent suction tube when the cleaning job is 
done, to rinse/fl ush any remaining detergents 
from the injection system.

For best results see Cleaning Tips for specifi c 
information on how to clean different surfaces.

Summary of Contents for G 2500 DCE















Reviews: