– 2
1 Button
2 Front part of the casing
3 Suction hose for detergent
4 Weight
5 Foot valve
6 Hook
7 Hose for detergent solution
8 Fastening hole
9 Outlet of detergent solution
10 Nozzle insert
11 Input of detergent
12 Floading ring
13 Water inlet
14 Locking
Install the accompanying pipe air-re-
lease valve on the water inlet.
Observe the flow direction (arrow) and
the vertical fitting position.
Press on the lock and remove the cabi-
net front.
Position the appliance in a way that the
foot valve is located at least 1 m below
the pipe air-release valve.
Mark 3 fastening holes on the wall
through the back of the casing.
Drill 3 holes with a diameter of 8 mm ap-
prox. 40 mm deep into the wall.
Insert the included dowels all the way
into the holes.
Screw the included screws into the top
two dowels.
Hook the cabinet back onto the screws.
Turn in the bottom screw and tighten all
the screws.
Select the nozzle insert for the desired
mixing ratio:
Operating and Functional Elements
Device installation
8
EN
