CWP 2000
English
5.959-373 A 2006471 (06/03)
Operating Instructions
Maintenance contract
In order to ensure that the system functions reliably, we
recommend that you take out a maintenance contract.
Please ask for details from your own Kärcher Customer
Service centre.
When servicing the system
System OFF
Before starting work on the system, switch the master
switch to “OFF” and secure it against being switched on
again by an unauthorised person. See also guidelines for
automotive washing systems VBG ZH (German
commercial employers’ liability insurance association)
1/543, paragraph 5.2.
Work on the system
Carry out servicing as required
Switching the system ON
To start up the system, set the master switch to “EIN”
(ON).
If necessary, move the gantry into the rest position.
Service mode
Your own safety and that of others demands that the
system is switched off when maintenance and servicing
is carried out.
However, not all system parts which have to be
maintained are freely accessible. This makes it
necessary for certain system parts to move during
maintenance and servicing. The “manual control” method
of operating is designed for this. Manual operations are
carried out using the control unit (option).
!
Attention!
For your own safety, and that of third parties, always
proceed in the following order:
1. Switch system ON
2. Select operating mode “Manual control” (see chapter C)
3. Move system component into desired position
4. Switch system OFF, and prevent inadvertent
reactivation
5. Carry out servicing task.
Requirement before calling up manual control:
n
No vehicle should be standing under the gantry.
F Maintenance and servicing
F2