19
Maintenance
WARNING: If the heater is left on unattended, the
wash solution could evaporate and the oil and
grease in the sump chamber could catch fire.
AVERTISSEMENT: Si le chauffe-eau est laissé sous
tension sans surveillance, l'eau pourrait s'évaporer
et l'huile et la graisse dans la chambre de lavage
pourrait prendre feu.
•
For periods of extended shut-down, disconnect
all power to the machine.
•
If your machine is equipped with an optional
programmable heater timer, periodically verify
the settings to prevent inadvertent
unattended operation.
Maintaining The Machine
To ensure optimum performance and trouble-free oper-
ation, observe the following maintenance schedule
consistently.
Daily Maintenance
•
Check the water level; add water if necessary.
•
Clean the debris screen.
•
Remove oil from the wash solution using the oil
skimmer system (See
Using the Oil Skimmer
System
).
Weekly Maintenance
•
Examine the spray nozzles; clean and align if
necessary (See
Cleaning and Aligning the
Spray Nozzles
).
•
Wipe down the exterior of the machine using
spray degreaser and a soft, damp cloth. TO
PREVENT ELECTRICAL COMPONENT
FAILURE, DO NOT SPRAY THE MACHINE
WITH WATER.
NOTE:
Spray degreaser and a damp cloth will
usually remove all dirt and grime from the machine.
For particularly stubborn soap deposits, use a soft
cloth dampened with warm solution from the wash
chamber.
Monthly Maintenance
•
Clean out the sump chamber and detail sump
(See
Cleaning out the Sump
).
•
Lubricate the door spindle using high-quality
automotive grease. Add grease until it begins to
flow out of the joint beneath the grease fitting,
then wipe excess grease from the fitting and the
joint.
•
Lubricate the turntable bearing using high-
quality automotive grease. The grease fitting is
accessible through the turntable deck. Add 1–2
strokes of grease, then wipe excess grease
from the fitting.
Semi-Annual Maintenance
•
Lubricate the pivot pin on the turntable motor
assembly with machine oil or anti-seize.
CUDA 7248 Operator’s Manual 9.801-712.0 - AA
Door Spindle
Grease Fittings
Grease
Fitting
Pivot Pin
Drive
Motor
Compression
Spring Assy.
