Kärcher BR 30/4 C, Manual

Page: 3 / 12

-
1
Please read and comply with
these original instructions prior
to the initial operation of your appliance and
store them for later use or subsequent own-
ers.
Before using the appliance for the first time,
read and observe these operating instruc-
tions and the accompanying brochure:
Safety information for brush cleaning units
and spray-extraction units, 5.956-251.

Danger
Immediate danger that can cause severe
injury or even death.
몇
Warning
Possible hazardous situation that could
lead to severe injury or even death.
Caution
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.
The scrubbing vacuum cleaner is used for
the wet cleaning of level floors.
A working width of 300 mm and a capacity
of 4 l each of the fresh and dirt water reser-
voirs enable an effective cleaning of small-
er surfaces.
The power supply operation allows a high
capacity without a restriction of the working
time.
Note
The appliance can be equipped with vari-
ous accessories depending on the cleaning
task. Please request our catalogue or visit
us on the Internet at www.kaercher.com.
Use this appliance only as directed in these
operating instructions.
–
The appliance may only be used for the
cleaning of hard surfaces that are not
sensitive to moisture and polishing op-
erations.
The application temperature ranges
from +5°C to +40°C.
–
The appliance is not suited for the
cleaning of frozen grounds (e.g. in cold
stores).
–
The appliance may only be equipped
with original accessories and spare
parts.
–
The appliance was designed for the
cleaning of floors inside or or covered
surfaces.
–
The appliance is not intended for the
cleaning of public traffic routes.
–
The appliance is not suited for the use
in potentially explosive environments.
Contents
Safety instructions EN - 1
Function EN - 1
Proper use EN - 1
Environmental protection EN - 2
Control elements EN - 2
Initial Start-Up EN - 2
Operation EN - 2
Transport EN - 4
Storage EN - 4
Maintenance and care EN - 4
Faults EN - 5
Technical specifications EN - 7
CE declaration EN - 8
Warranty EN - 8
Spare parts EN - 8
Safety instructions
Symbols in the operating instruc-
tions
Function
Proper use
11 EN