Kärcher BD 55 W BAT, Manual

Page: 32 / 501

32
English
Î
Remove the plastic parts.
Î
Remove the vacuum lips.
Î
Insert new vacuum lips.
Î
Insert the plastic parts.
Î
Screw in and tighten the star grips.
Î
Release the wing nuts.
Î
Remove bearing lid.
Î
Take out the brush roller, insert a new
one (pay attention to the hexagonal in-
take of the brush rollers).
Î
Place bearing lid.
Î
Tighten the wing nuts.
Î
Repeat process on the opposite side.
Î
Raise the disk brushes.
Î
Turn the right disk brush by approx. 45°
in clock-wise direction. Turn the left
disk brush by approx. 45° in anti-clock-
wise direction.
Î
Remove the disk brushes at the bottom.
Î
Insert the new disk brushes in reverse
sequence.
Î
Loosen both screws.
Î
Move both the drawing springs in the
desired position.
Î
Align the splash guard.
Î
Tighten both the screws.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
In case of danger of frost:
Î
Empty the fresh and dirt water reser-
voirs.
Î
Store the appliance in a frost-protected
room.

Danger
Risk of injury! When loading or unloading
the machine, it may only be operated on
gradients of max. 10%. Drive slowly.
Replacing the brush rollers
Replacing the Disk Brushes
Mount splash guard
(BD 55/60 W only...)
Maintenance contract
Frost protection
Transport