Kärcher BD 55 W BAT, Manual

Page: 28 / 501

28
English
Note
If the info button is not pressed for 10 sec-
onds the display toggles to the battery dis-
play.
–
Shortly press the info button - display
blinks.
– Set the speed by turning the info button.
The value can be set in increments of
10% between 30% and 100%.
– Press the info button to confirm the set
value.
BD 55/60 W
–
Forwards:
Press the Info button until "Clean spd
Fwd" is displayed.
– Backward:
Press the Info button until "Clean spd
Rev" is displayed.
– Press the button for setting the working
speed.
Î
Open cover.
Î
Fill fresh water (maximum 60 °C) until
the lower edge of the filling nozzle.
몇
Warning
Risk of damage. Only use the recommend-
ed detergents. With respect to different de-
tergents the operator bears the increased
risk regarding the operational safety and
danger of accident.
Only use detergents that are free from sol-
vents, hydrochloric acid and hydrofluoric
acid.
Note
Do not use highly foaming detergents.
Recommended detergents:
Î
Add detergent. Follow dosing instruc-
tions for detergent.
Î
Adjust the water quantity using the reg-
ulating button according to the dirt on
the floor covering.
Note
Carry out the initial cleaning attempts with
little quantities of water. Increase water
quantity step-by-step until the desired
cleaning result is achieved.
Î
Turn the lever downwards; the vacuum
bar is lowered and the suction turbine is
switched on.
Filling in detergents
Fresh water
Detergent
Application Detergent
Routine cleaning of all wa-
ter resistant floors RM 745
RM 746
Routine cleaning of glossy
surfaces (e.g. granite) RM 755 es
Routine cleaning and ba-
sic cleaning of industrial
floors RM 69 ASF
Routine cleaning and ba-
sic cleaning of fine stone-
ware tiles RM 753
Routine cleaning of tiles in
sanitary areas RM 751
Cleaning and disinfection
in sanitary areas RM 732
Removal of coating from
all alkali-resistant floors
(e.g. PVC) RM 752
Removal of coating from li-
noleum floors RM 754
Settings
Setting the water quantity
Lower the vacuum bar