Kärcher BD 50/50 C Bp Classic, Service Manual

Page: 53 / 229

English
9.808-230.0 Rev. 01 (03/20)
53
1 Retaining rings
2 Axle
3 Contact roller brush plate
 Remove the retaining rings.
 Pull out axle.
Installation information
Pay attention to the correct fitting position during reinstal-
lation.
1 Disc brush
2 Handle disc replacement
 Push down the device holding the push handle so that
the cleaning head is raised.
 Push down the bracket disc replacement using your
foot.
 Pull the device towards the back so that the disc brush
becomes accessible.

AKBE Uninstall / install disc brush

AEAA Lay the device on its side for maintenance work

AKBW Uninstall/ install cleaning head

AKBT Uninstall / install spring bracket disc replacement
1 Screws
2 Retaining plates
3 Handle disc replacement
4 Clamp

Unscrew the screws.

Remove the retaining plates.

Remove the bracket disc replacement.

Reinstall clamp.
AKBE Uninstall / install disc brush
AKBS Uninstall / install bracket disc replacement